Original Factory Latest Oil Expeller - 200A-3 Screw Oil Expeller – Fotma

Product Description

200A-3 screw oil expeller is widely applies for oil pressing of rapeseeds, cotton seeds, peanut kernel, soybean, tea seeds, sesame, sunflower seeds, etc.. If change the inner pressing cage, which can be used for oil pressing for low oil content materials such as rice bran and animal oil materials. It is also the major machine for second pressing of high oil content materials such as copra. This machine is with high market share.

The 200A-3 oil press machine is mainly comprised of feeding chute, pressing cage, pressing shaft, gear box and main frame, etc.. The materials enters the pressing cage from the chute, and be propelled, squeezed, turned, rubbed and pressed, the mechanical energy is converted into heat energy, and gradually expels the oil out, the oil flows out the slits of pressing cage, collected by the oil dripping chute, then flows into oil tank. The cake is expelled out from end of the machine. The machine is with compact structure, moderate floor area consumption, easy maintenance and operation.

Features

1. It is traditional oil pressing machine that specially designed for pre-pressing process.
2. All the easily worn parts of this machine such as main shaft, pressing worms, cage bars, gears, are made by good quality alloy steel with harden treatment on the surface, which is quite durable.
3. The machine can be equipped with auxiliary steam tank, which can adjust the pressing temperature and water content of seeds, so as to get higher oil yield.
4. Continuous automatically work from feeding, cooking till oil and cake discharging, the operation is easy and convenient.
5. Large production capacity, workshop floor area and power consumption are saved, the maintenance and operation is easy and convenient.
6. The cake is of loose structure, help the solvent permeate the cake, and the oil and water content of cake is suitable for solvent extraction.

Technical data

1. Inside diameter of steaming kettle: Ø1220mm
2. Stirring shaft speed: 35rpm
3. Steam pressure: 5-6Kg/cm2
4. Diameter of pressing bore: Front section Ø180mm, Rear section Ø152mm
5. Pressing worn speed: 8rpm
6. Feeding shaft speed:69rpm
7. Pressing time in cage: 2.5min
8. Seed steaming and roasting time: 90min
9. Max.temperature for seed steaming and roasting:125-128℃
10. Capacity: 9-10ton per 24 hours (with rapeseeds or oil sunflower seeds as sample)
11. Oil content of cake: 6% (Under normal pre-treatment)
12. Motor power:18.5KW, 50HZ
13. Overall dimensions(L*W*H): 2850*1850*3270mm
14. Net weight: 5000kg

Capacity(The processing capacity for raw seeds)