202-3 Screw Oil Press Machine
Product Description
202 Oil pre-press machine is applicable for pressing of various kind of oil-bearing vegetable seeds such as rapeseed, cottonseed, sesame, peanut, soybean, teaseed, etc. The press machine is mainly comprised of feeding chute, pressing cage, pressing shaft, gear box and main frame, etc. The meal enters the pressing cage from the chute, and be propelled, squeezed, turned, rubbed and pressed, the mechanical energy is converted into heat energy, and gradually expels the oil out, the oil flows out the slits of pressing cage, collected by the oil dripping chute, then flows into oil tank. The cake is expelled out from end of the machine. The machine is of compact structure, moderate floor area consumption, easy maintenance and operation.
Features
The 202 pre-press has a process characteristics suitable for pre-pressing, which has the following characteristics:
1. The processing capacity is large, the workshop area, power consumption, operation, management and maintenance work corresponding reduction.
2. The structure of cake is loose and not pure, is conducive for solvent penetration.
3. The oil content and moisture of cake is suitable for solvent leaching.
4. The quality of pre-pressed oil is better than the oil that from once-press processing and direct leaching.
5. It can be updated to 204 oil pre-press machine, the investment is significantly reduced.
Technical data
1. Capacity: 45 ~ 50T / 24H ( take sunflower seeds or rapeseeds as an example)
2. Oil residue rate of dry cake: about 13% (under normal pre-treatment condition)
3. The motor: Y225M-6, 1000 r/min, 30 kilowatts, 220/380V, 50Hz
4. Net weight: about 5500 kg
5. Dimension: 2900 × 1850 × 3640 mm
Related products
-
ZY Series Hydraulic Oil Press Machine
Product Description FOTMA focus on producing oil press machines and our products won several national patents and was official certified, the technical of oil press is continuous updating and the quality is reliable. With excellent production technology and high-quality after-sales service, the market share is steadily rising. Through gather tens of thousands of consumer’s successful pressing experience and management model, we can provide you...
-
Oil Seeds Pretreatment: Groundnut Shelling Machine
The main oil seeds shelling equipment 1. Hammer shelling machine (peanut peel). 2. Roll-type shelling machine (castor bean peeling). 3. Disk shelling machine (cottonseed). 4. Knife board shelling machine (cottonseed shelling) (Cottonseed and soybean, peanut broken). 5. Centrifugal shelling machine (sunflower seeds, tung oil seed, camellia seed, walnut and other shelling). Groundnut Shelling Machine ...
-
Edible Oil Extraction Plant: Drag Chain Extractor
Product Description Drag chain extractor is also known as drag chain scraper type extractor. It is quite similar with the belt type extractor in structure and form, thus it can also be seen as the derivative of the loop type extractor. It adopts the box structure that removes the bending section and unifies the separated loop type structure. The leaching principle is similar as the ring extractor. Though the bending section is removed, materia...
-
Oil Seeds Pretreatment Processing-Destoning
Introduction Oil seeds need to be cleaned to remove plant stems, mud and sand, stones and metals, leaves and foreign material before being extracted. Oil seeds without careful selecting will speed up the wearings of the accessories, and can even lead to damage of the machine. Foreign materials are typically separated out by a vibrating sieve, however, some oilseeds such as peanuts may contain stones which are similar in size to the seeds. Henc...
-
Solvent Extraction Oil Plant: Rotocel Extractor
Product Description Cooking oil extractor mainly includes rotocel extractor, loop type extractor and towline extractor. According to different raw material , we adopt different type extractor. Rotocel extractor is the most widely used cooking oil extractor at home and abroad, it is the key equipment for oil production by extraction. Rotocel extractor is the extractor with a cylindrical shell, a rotor and a drive device inside, with simple stru...
-
204-3 Screw Oil Pre-press Machine
Product Description 204-3 oil expeller, a continuous screw type pre-press machine, is suitable for pre-press + extraction or twice pressing processing for the oil materials with higher oil content like peanut kernel,cotton seed, rape seeds, safflower seeds, castor seeds and sunflower seeds, etc. The 204-3 oil press machine is mainly comprised of feeding chute, pressing cage, pressing shaft, gear box and main frame, etc. The meal enters the pre...