204-3 Screw Oil Pre-press Machine
Product Description
204-3 oil expeller, a continuous screw type pre-press machine, is suitable for pre-press + extraction or twice pressing processing for the oil materials with higher oil content like peanut kernel,cotton seed, rape seeds, safflower seeds, castor seeds and sunflower seeds, etc.
The 204-3 oil press machine is mainly comprised of feeding chute, pressing cage, pressing shaft, gear box and main frame, etc. The meal enters the pressing cage from the chute, and be propelled, squeezed, turned, rubbed and pressed, the mechanical energy is converted into heat energy, and gradually expels the oil out, the oil flows out the slits of pressing cage, collected by the oil dripping chute, then flows into oil tank. The cake is expelled out from end of the machine. The machine is of compact structure, moderate floor area consumption, easy maintenance and operation.
The 204 pre-press expeller is suitable for pre-pressing. Under normal preparation conditions, it has following features:
1. The pressing capacity is high, thus the workshop area, power consumption, operation and management and maintenance job will be reduced accordingly.
2. The cake is loose but not easily broken, which is conducive for solvent penetration.
3. Both the oil content and moisture of the squeezed cake are suitable for solvent leaching.
4. The quality of pressed oil is better than the oil from single pressing or single extraction.
Technical data
Capacity: 70-80t/24hr.(take the cotton seed kernel as example)
Residual oil in cake: ≤18% (Under normal pre-treatment)
Motor: 220/380V, 50HZ
Main shaft: Y225M－6, 30 kw
Digestor stir: BLY4-35, 5.5KW
Feeding shaft: BLY2-17, 3KW
Overall dimensions(L*W*H):2900×1850×4100 mm
Net weight: about 5800kg
Related products
-
Oil Seeds Pretreatment Processing: Cleaning
Introduction The oilseed in the harvest, in the process of transportation and storage will be mixed with some impurities, so the oilseed import production workshop after the need for further clean-up, the impurity content dropped to within the scope of technical requirements, to ensure that the process effect of oil production and product quality. The impurities contained in oil seeds can be divided into three types: organic impurities, inorga...
-
Computer Controlled Auto Elevator
Features 1. One -key operation, safe and reliable, high degree of intelligence, suitable for the Elevator of all oil seeds except rape seeds. 2. The oil seeds is automatically raised, with fast speed. When the oil machine hopper is full, it will automatically stop the lifting material, and will start up automatically when the oil seed is insufficient. 3. When there is no material to be raised during the process of ascension, the buzzer alarm w...
-
Oil Seeds Pretreatment Processing-Destoning
Introduction Oil seeds need to be cleaned to remove plant stems, mud and sand, stones and metals, leaves and foreign material before being extracted. Oil seeds without careful selecting will speed up the wearings of the accessories, and can even lead to damage of the machine. Foreign materials are typically separated out by a vibrating sieve, however, some oilseeds such as peanuts may contain stones which are similar in size to the seeds. Henc...
-
Solvent Extraction Oil Plant: Rotocel Extractor
Product Description Cooking oil extractor mainly includes rotocel extractor, loop type extractor and towline extractor. According to different raw material , we adopt different type extractor. Rotocel extractor is the most widely used cooking oil extractor at home and abroad, it is the key equipment for oil production by extraction. Rotocel extractor is the extractor with a cylindrical shell, a rotor and a drive device inside, with simple stru...
-
Oil Seeds Pretreatment Processing- Small Peanut...
Introduction Peanut or groundnut is one of the important oil crops in the world, groundnut kernel is often used to make cooking oil. Peanut huller is used to shell peanuts. It can shell peanut completely, separate shells and kernels with high-efficiency and almost without damage to the kernel. The sheeling rate can be ≥95%, the breaking rate is ≤5%. While peanut kernels are used for food or the raw material for oil mill, the shell could be use...
-
SYZX Cold Oil Expeller with twin-shaft
Product Description The SYZX series cold oil expeller is a new twin-shaft screw oil press machine which designed in our innovative technology. In the pressing cage there are two parallel screw shafts with contrary rotating direction, conveying the material forward by shearing force, which has strong pushing force. The design can get high compression ratio and oil gain, the oil outflow pass can be self-cleaned. The machine is suitable for both ...