LYZX series cold oil pressing machine
Product Description
LYZX series cold oil pressing machine is a new generation of low-temperature screw oil expeller developed by FOTMA, it is applicable for producing vegetable oil at low temperature for all kinds of oil seeds, such as rapeseed, hulled rapeseed kernel, peanut kernel, chinaberry seed kernel, perilla seed kernel, tea seed kernel, sunflower seed kernel, walnut kernel and cotton seed kernel.
It is the oil expeller that specially suitable for mechanically processing common plants and the oil crops with high added value and characterized by low oil temperature, high oil-out ratio and low oil content remained in dreg cakes. Oil processed by this expeller is characterized by light color, top quality and rich nutrition and conforms to the standard of the international market, which is prior equipment for oil factory of pressing multi-kinds of raw materials and special kinds of oilseeds.
LYZX34 expeller uses new pressing technology which integrates middle-temperature pre-pressing and low-temperature pressing, which is a new model pressing expeller could press the seeds under both middle temperature and low temperature conditions. Applicable for the middle-temperature or low-temperature pressing of oil seeds such as canola seed, cotton seed kernel, peanut kernel, sunflower kernel, etc.
The LYZX type cold screw oil expeller is characterized by a technology suitable for oil expelling under a lower temperature and has following features under normal treating conditions:
1. Low-temperature pressing technology. The oil processed with this expeller is characterized by light color and rich nutrition, which is purely natural oil after settling and filtering. This technology can safe the refining cost and lower the refining loss.
2. The pressing temperature of seed before pressing is low, oil and cake have light color and good quality, which is quite good for the high efficiency using of cake.
3. Little damage of protein in the dreg cakes during low-temperature pressing is in favor off full use of the protein in the oil seeds. During processing, oil seeds don’t keep touch with any solvent, acid, alkali and chemical additives. Thus loss of nutrition ingredients and microelements in the finished oil and dreg cakes is little and protein content in the dreg cakes is high.
4. Low operation temperature(10℃～50℃) can decrease consumption of the steam.
5. Good pre-pressing cake with many tiny interstice, good for solvent extraction.
6. Comes with temperature and moisture adjusting device, auto-continuous working, easy to operate and maintain.
7. The easily worn parts use high anti-abrasion material, which has long service life.
8. Different models with different production capacity for your choice. All the models comes with perfect structure, reliable running, high efficiency, low residual oil rate in cake, wide application range.
Technical data
|
Model |
LYZX18 |
LYZX24 |
LYZX28 |
LYZX32 |
LYZX34 |
| Production Capacity |
6-10t/d |
20-25t/d |
40-60t/d |
80-100t/d |
120-150t/d |
| Feeding Temperature |
approx. 50℃ |
approx. 50℃ |
approx. 50℃ |
approx. 50℃ |
approx. 50℃ |
| Oil content in cake |
4-13% |
10-19% |
15-19% |
15-19% |
10-16% |
| Total motor power |
(22+4+1.5)kw |
30+5.5(4)+3kw |
45+11+1.5kw |
90+7.5+1.5kw |
160kw |
| Net weight |
3500kg |
6300(5900)kg |
9600kg |
12650kg |
14980kg |
| Dimension |
3176×1850×2600mm |
3180×1850×3980(3430)mm |
3783×3038×3050mm |
4832×2917×3236mm |
4935×1523×2664mm |
LYZX28 Product capacity(flake processing capacity)
|
Name of oil seed |
Capacity(kg/24hrs ) |
Residual oil in dry cake（%) |
|
Hulled rapeseeed kernel |
35000-45000 |
15-19 |
|
Peanut kernel |
35000-45000 |
15-19 |
|
chinaberry seed kernel |
30000-40000 |
15-19 |
|
perilla seed kernel |
30000-45000 |
15-19 |
|
sunflower seed kernel |
30000-45000 |
15-19 |
LYZX32 Production capacity(flake processing capacity)
|
Name of oil seed |
Capacity(kg/24hrs ) |
Residual oil in dry cake（%) |
|
Hulled rapeseeed kernel |
80000-100000 |
15-19 |
|
Peanut kernel |
60000-80000 |
15-19 |
|
chinaberry seed kernel |
60000-80000 |
15-19 |
|
perilla seed kernel |
60000-80000 |
15-19 |
|
sunflower seed kernel |
80000-100000 |
15-19 |
Technology Data for LYZX34:
1. Capacity
Middle temperature pressing capacity:250-300t/d.
Low temperature pressing capacity:120-150t/d.
2. Pressing temperature
Middle temperature pressing: 80-90℃, water content before pressing:4%-6%.
Low temperature pressing: environmental temperature -65℃, water content before pressing 7%-9%.
3. Dry cake residual oil rate
Middle temperature pressing:13%-16%;
Low temperature pressing:10%-12%.
4. Motor power
Middle temperature pressing main motor power 185KW.
Low temperature pressing main motor power 160KW.
5. Main shaft rotating speed
Middle temperature pressing main shaft rotating speed 50-60r/min.
Low temperature pressing main shaft rotating speed 30-40r/min.
Related products
-
Oil Seeds Pretreatment Processing-Destoning
Introduction Oil seeds need to be cleaned to remove plant stems, mud and sand, stones and metals, leaves and foreign material before being extracted. Oil seeds without careful selecting will speed up the wearings of the accessories, and can even lead to damage of the machine. Foreign materials are typically separated out by a vibrating sieve, however, some oilseeds such as peanuts may contain stones which are similar in size to the seeds. Henc...
-
YZLXQ Series Precision Filtration Combined Oil ...
Product Description This oil press machine is a new research improvement product. It is for oil extraction from oil materials, such as sunflower seed, rapeseed, soybean,peanut etc. This machine adopts square rods technology, suitable for the press materials of high oil content. The automatic temperature control precision filtration combined oil press has replaced the tradictional way that the machine has to be preheated the squeeze chest, loop...
-
200A-3 Screw Oil Expeller
Product Description 200A-3 screw oil expeller is widely applies for oil pressing of rapeseeds, cotton seeds, peanut kernel, soybean, tea seeds, sesame, sunflower seeds, etc.. If change the inner pressing cage, which can be used for oil pressing for low oil content materials such as rice bran and animal oil materials. It is also the major machine for second pressing of high oil content materials such as copra. This machine is with high market s...
-
Oil Seeds Pretreatment Processing: Cleaning
Introduction The oilseed in the harvest, in the process of transportation and storage will be mixed with some impurities, so the oilseed import production workshop after the need for further clean-up, the impurity content dropped to within the scope of technical requirements, to ensure that the process effect of oil production and product quality. The impurities contained in oil seeds can be divided into three types: organic impurities, inorga...
-
Centrifugal type Oil Press Machine with Refiner
Product Description FOTMA has devoted more than 10 years to research and develop the production of oil pressing machinery and its auxiliary equipment. The tens of thousands of successful oil pressing experiences and business models of customers have been gathered for more than ten years. All types of oil press machines and their auxiliary equipment sold have been verified by the market for many years, with advanced technology, stable performan...
-
LD Series Centrifugal Type Continous Oil Filter
Features 1. Operation: vertical centrifugal oil refining, rapid separation of oil sludge, the whole process only takes 5-8 minutes. 2. Automatic control: set the timer, automatically stop the oil, the oil is not stored in the machine, and the refining of hundreds of kilograms only needs to be cleaned once. 3. Installation: flat floor, can be installed without screw fixation. Technical Data ...