Oil Seeds Pretreatment Processing – Oil Seeds Disc Huller
Introduction
After cleaning, oilseeds such as sunflower seeds are conveyed to the seed dehulling equipment to separate the kernels. The purpose of oil seeds shelling and peeling is to improve the oil rate and the quality of the extracted crude oil, improve the protein content of the oil cake and reduce the cellulose content, improve the use of oil cake value, reduce the wear and tear on the equipment, increase the effective production of equipment, facilitate the follow-up of the process and the comprehensive utilization of leather shell. The current oil seeds that need to be peeled are soybeans, peanuts, rapeseed, sesame seeds and so on.
FOTMA brand GCBK series seed dehulling machine is the best selling model among our seed hulling machines / disc hullers, which are usually used in large oil processing plant. Through the addition of a stirring wheel between the fixed and moving discs, the working area is increased. This greatly increases the machine’s efficiency and capacity. Despite these productivity-boosting features, our disc huller’s power consumption is only 7.4 kW/t of oil materials.
Characteristics of Disc Huller
Hulling Ratio achieve to 99% but no whole seed left for second dehulling.
Short lint is moved when decorticating. Within the complete soybean decorticating line, we match the Fans & Cyclone which often can collect the short lint, therefore it could be much easier to broken up the actual Hulls & Popcorn kernels and raise the proteins content in cakes & meal. An additional benefit of our own Seed Hulling Machine could be maintain your work shop in good clean working condition.
Main Technical Data of Seed Hulling Machine / Disc Huller
|
Model |
Capacity (t/d) | Power(kw) | Weight (kg) | Dimension(mm) |
|
GCBK71 |
35 | 18.5 | 1100 | 1820*940*1382 |
|
GCBK91 |
50-60 |
30 |
1700 | 2160*1200*1630 |
|
GCBK127 |
100-170 | 37-45 | 2600 |
2400*1620*1980 |
GCBK series seed hulling machine is one of the widely used seed hulling machines in the process of oilseed hulling. It is used not only in the de-hulling of oilseed shells like cottonseed and peanuts, but also in crushing oilseeds such as soybeans and even the oil cake.
Welcome to get in touch with us anytime you find interest in our seed hulling machine or complete oil processing plant!
Related products
-
Oil Seeds Pretreatment: Groundnut Shelling Machine
The main oil seeds shelling equipment 1. Hammer shelling machine (peanut peel). 2. Roll-type shelling machine (castor bean peeling). 3. Disk shelling machine (cottonseed). 4. Knife board shelling machine (cottonseed shelling) (Cottonseed and soybean, peanut broken). 5. Centrifugal shelling machine (sunflower seeds, tung oil seed, camellia seed, walnut and other shelling). Groundnut Shelling Machine ...
-
Edible Oil Refining Process: Water Degumming
Product Description Degumming process in oil refining plant is to remove gum impurities in crude oil by physical or chemical methods, and it is the first stage in oil refining / purification process. After screw pressing and solvent extracting from oilseeds, the crude oil mainly contains triglycerides and few non-triglyceride. The non-triglyceride composition including phospholipids, proteins, phlegmatic and sugar would react with triglyceride...
-
YZLXQ Series Precision Filtration Combined Oil ...
Product Description This oil press machine is a new research improvement product. It is for oil extraction from oil materials, such as sunflower seed, rapeseed, soybean,peanut etc. This machine adopts square rods technology, suitable for the press materials of high oil content. The automatic temperature control precision filtration combined oil press has replaced the tradictional way that the machine has to be preheated the squeeze chest, loop...
-
LD Series Centrifugal Type Continous Oil Filter
Features 1. Operation: vertical centrifugal oil refining, rapid separation of oil sludge, the whole process only takes 5-8 minutes. 2. Automatic control: set the timer, automatically stop the oil, the oil is not stored in the machine, and the refining of hundreds of kilograms only needs to be cleaned once. 3. Installation: flat floor, can be installed without screw fixation. Technical Data ...
-
Solvent Leaching Oil Plant: Loop Type Extractor
Product Description Solvent leaching is a process to extract oil from oil bearing materials by means of solvent, and the typical solvent is hexane. The vegetable oil extraction plant is part of vegetable oil processing plant which is designed to extract oil directly from oil seeds containing less than 20% oil, like soybeans, after flaking. Or it extracts oil from pre-pressed or fully pressed cake of seeds containing more than 20% oil, like sun...
-
6YL Series Small Screw Oil Press Machine
Product Description 6YL Series small scale screw oil press machine can press all kinds of oil materials such as peanut, soybean, rapeseed, cottonseed, sesame, olive, sunflower, coconut, etc. It is suitable for medium and small scale oil factory and private user, as well as the pre-pressing of extraction oil factory. This small scale oil press machine is mainly composed of feeder, gearbox, pressing chamber and oil receiver. Some screw oil press...