200A-3 Screw Oil Expeller
Product Description
200A-3 screw oil expeller is widely applies for oil pressing of rapeseeds, cotton seeds, peanut kernel, soybean, tea seeds, sesame, sunflower seeds, etc.. If change the inner pressing cage, which can be used for oil pressing for low oil content materials such as rice bran and animal oil materials. It is also the major machine for second pressing of high oil content materials such as copra. This machine is with high market share.
The 200A-3 oil press machine is mainly comprised of feeding chute, pressing cage, pressing shaft, gear box and main frame, etc.. The materials enters the pressing cage from the chute, and be propelled, squeezed, turned, rubbed and pressed, the mechanical energy is converted into heat energy, and gradually expels the oil out, the oil flows out the slits of pressing cage, collected by the oil dripping chute, then flows into oil tank. The cake is expelled out from end of the machine. The machine is with compact structure, moderate floor area consumption, easy maintenance and operation.
Features
1. It is traditional oil pressing machine that specially designed for pre-pressing process.
2. All the easily worn parts of this machine such as main shaft, pressing worms, cage bars, gears, are made by good quality alloy steel with harden treatment on the surface, which is quite durable.
3. The machine can be equipped with auxiliary steam tank, which can adjust the pressing temperature and water content of seeds, so as to get higher oil yield.
4. Continuous automatically work from feeding, cooking till oil and cake discharging, the operation is easy and convenient.
5. Large production capacity, workshop floor area and power consumption are saved, the maintenance and operation is easy and convenient.
6. The cake is of loose structure, help the solvent permeate the cake, and the oil and water content of cake is suitable for solvent extraction.
Technical data
1. Inside diameter of steaming kettle: Ø1220mm
2. Stirring shaft speed: 35rpm
3. Steam pressure: 5-6Kg/cm2
4. Diameter of pressing bore: Front section Ø180mm, Rear section Ø152mm
5. Pressing worn speed: 8rpm
6. Feeding shaft speed:69rpm
7. Pressing time in cage: 2.5min
8. Seed steaming and roasting time: 90min
9. Max.temperature for seed steaming and roasting:125-128℃
10. Capacity: 9-10ton per 24 hours (with rapeseeds or oil sunflower seeds as sample)
11. Oil content of cake: 6% (Under normal pre-treatment)
12. Motor power:18.5KW, 50HZ
13. Overall dimensions(L*W*H): 2850*1850*3270mm
14. Net weight: 5000kg
Capacity(The processing capacity for raw seeds)
|
Name of oil seed |
Capacity(kg/24h ) |
Residual oil in dry cake（%) |
|
Rape seeds |
9000～12000 |
6～7 |
|
Peanuts |
9000～10000 |
5～6 |
|
Sesame seed |
6500～7500 |
7～7.5 |
|
Cotton beans |
9000～10000 |
5～6 |
|
Soya beans |
8000～9000 |
5～6 |
|
Sunflower seed |
7000～8000 |
6～7 |
|
Rice bran |
6000～7000 |
6～7 |
Related products
-
Oil Seeds Pretreatment Processing – Oil S...
Introduction After cleaning, oilseeds such as sunflower seeds are conveyed to the seed dehulling equipment to separate the kernels. The purpose of oil seeds shelling and peeling is to improve the oil rate and the quality of the extracted crude oil, improve the protein content of the oil cake and reduce the cellulose content, improve the use of oil cake value, reduce the wear and tear on the equipment, increase the effective production of equip...
-
LD Series Centrifugal Type Continous Oil Filter
Features 1. Operation: vertical centrifugal oil refining, rapid separation of oil sludge, the whole process only takes 5-8 minutes. 2. Automatic control: set the timer, automatically stop the oil, the oil is not stored in the machine, and the refining of hundreds of kilograms only needs to be cleaned once. 3. Installation: flat floor, can be installed without screw fixation. Technical Data ...
-
SYZX Cold Oil Expeller with twin-shaft
Product Description The SYZX series cold oil expeller is a new twin-shaft screw oil press machine which designed in our innovative technology. In the pressing cage there are two parallel screw shafts with contrary rotating direction, conveying the material forward by shearing force, which has strong pushing force. The design can get high compression ratio and oil gain, the oil outflow pass can be self-cleaned. The machine is suitable for both ...
-
204-3 Screw Oil Pre-press Machine
Product Description 204-3 oil expeller, a continuous screw type pre-press machine, is suitable for pre-press + extraction or twice pressing processing for the oil materials with higher oil content like peanut kernel,cotton seed, rape seeds, safflower seeds, castor seeds and sunflower seeds, etc. The 204-3 oil press machine is mainly comprised of feeding chute, pressing cage, pressing shaft, gear box and main frame, etc. The meal enters the pre...
-
Edible Oil Extraction Plant: Drag Chain Extractor
Product Description Drag chain extractor is also known as drag chain scraper type extractor. It is quite similar with the belt type extractor in structure and form, thus it can also be seen as the derivative of the loop type extractor. It adopts the box structure that removes the bending section and unifies the separated loop type structure. The leaching principle is similar as the ring extractor. Though the bending section is removed, materia...
-
Oil Seeds Pretreatment Processing: Cleaning
Introduction The oilseed in the harvest, in the process of transportation and storage will be mixed with some impurities, so the oilseed import production workshop after the need for further clean-up, the impurity content dropped to within the scope of technical requirements, to ensure that the process effect of oil production and product quality. The impurities contained in oil seeds can be divided into three types: organic impurities, inorga...